unisonic technologies co., ltd UH10K npn silicon transistor www.unisonic.com.tw 1 of 3 copyright ? 2009 unisonic technologies co., ltd qw-r218-010.a general purpose (dual digital transistors) ? features * two utc dtc123j chips in a sot-363 package. * halogen free ? equivalent circuit (r 1 =2k ? , r 2 =47k ? ) r 1 r 2 r 1 r 2 1 6 2 3 4 5 tr1 tr2 ? ordering information pin assignment ordering number package 1 2 3 4 5 6 packing UH10Kg-al6-r sot-363 e1 b1 c2 e2 b2 c1 tape reel ? marking uhkkg 1 23 4 5 6
UH10K npn silicon transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r218-010.a ? absolute maximum ratings (ta=25 c) parameter symbol ratings unit supply voltage v cc 50 v input voltage v in -5 ~ +12 v i out 100 ma output current i c(max.) 100 ma power dissipation p d 150 mw junction temperature t j 150 c storage temperature t stg -55 ~ +150 c note: absolute maximum ratings are those values be yond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (ta =25 c) parameter symbol test conditions min typ max unit v i(off) v cc =5v, i out =100 a 0.5 v input voltage v i(on) v out =0.3v, i out =5ma 1.1 v output voltage v o(on) i out /i in =5ma/0.25ma 0.1 0.3 v input current i in v in =5v 3.6 ma output current i o(off) v cc =50v, v in =0v 0.5 a dc current gain h fe v out =5v, i out =10ma 80 transition frequency f t v ce =10v, i e =-5ma, f=100mhz (note) 250 mhz input resistance r 1 1.4 2 2.6 k ? resistance ratio r 2 /r 1 18 23 28 note: transition frequency of the device
UH10K npn silicon transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r218-010.a ? typical characteristics 0204060 80 100 120 140 160 10 20 30 40 50 60 70 0 0246 8 10 12 14 2 4 6 8 10 12 14 0 dc current gain output voltage, v out (v) output current, i out ( a) v o -gnd breakdown voltage output voltage, v out (v) output current, i out ( a) utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
